Inventory control in a widen sense is defined as any idle resource of in enterprise in order to meet expects of demand or distribution. Inventory control is commonly used to indicate materials, raw materials, finished, packing and stocked products. It is basically necessary to keep hold inventory of various kinds to act as a […]
What is fabric Inventory control system for apparel factories? Read More »
A.Q.L is an abbreviated word. It means the acceptable quality level. It means an idea, up to where the buyer accepts the garments. A.Q.L Table: Lot Size Acceptable Quality Level 1.5 2.5 4.0 6.5 Inspected Accepted Inspected Accepted Inspected Accepted Inspected Accepted Less then151 8 0 5 0 13 1 8 1 151-280 8 0
What is A.Q.L (Acceptable Quality Level) ? Read More »
A trim card means a display board of accessories for a single body. It is issued by the buyer to the merchandiser. Merchandiser issues it to the store, cutting, sewing, and finishing section. Trim card contains To make a trim card firstly have to attach sewing item then metal item & at last finishing items
What does Trim Card mean ? Read More »
Most of the production systems employed in clothing factories are derived from the following manual or mechanical systems. Each apparel manufacturing systems has its own specific operational characteristics. This article discusses the features, merits and demerits of different garment production systems. Individual system/Make through/Whole garment system: This is essentially the traditional method of production whereby
Apparel Manufacturing systems Read More »
Compacting is a textile finishing machine specifically designed for compacting 100% cotton knitted fabrics such as jersey, pique, interlock, and rib. Compactors are also called compactors or felt compactors. The purpose of the compacting machine is to prevent the shrinkage of knitwear. Compression can be done not only on tubular fabrics but also on wide
Compacting machine for Textile Finishing Read More »
For heat Transfer printing impression mark is common scenario that is visible on garments after heat press on garments. Below is the one way to avoid impression mark on the garment surface. If the transfer film/paper is leaving an impression mark on the fabric, you need to cut a block of Silicon Rubber, approximately 1cm
The standardization of colour measurement is essential to control and achieve accurate colour communication. A set of procedures for colour measurement has been created to minimize error. These procedures will also help to achieve greater consistency of shade in stores whilst eliminating delays, therefore reducing lead times and increasing flexibility. Equipment Required: 1. Conditioning Cabinet
Instrumental Colour Measurement Procedures; Color measurement by spectrophotometer Read More »
Different types of fabrics are used differently. They are specially made to fulfill certain purposes. Apparel fabric is very dressy with a comfort and durability whereas industrial fabric should be strong and tough with grease resistant. Outdoor fabric should possess the quality to retain color over years while hosiery fabric is supposed to fit the
Application Range of Different Types of Fabrics Read More »
The appearance of a garment is greatly influenced by the fabric used for construction, not all fabrics are suitable for all garments. To choose a suitable fabric for a specific end use calls for basic knowledge in fabric construction and types of fabrics available in the market. Fabrics are produced mostly from yarns. Few fabrics
Identify the importance of different fabrics for Apparel Manufacturing Read More »
Illuminant Metamerism: Illuminant Metamerism is used to describe the fact that two lights with different proportions of energy at certain wavelengths may produce the same perception of colour . The word “METAMERIC” should not be used to describe objects which do not appear to match under any condition. For these objects, Fred Billmeyer suggests the
